-- *****************************************************************
-- CISCO-CALL-RESOURCE-POOL-MIB.my: Cisco Call Resource Pool MIB file.
--
-- Copyright (c) 1998, 1999-2005 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--CISCO-CALL-RESOURCE-POOL-MIB DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITY,OBJECT-TYPE,TimeTicks,Integer32,Gauge32,Counter32,Unsigned32FROM SNMPv2-SMI
MODULE-COMPLIANCE,OBJECT-GROUPFROM SNMPv2-CONF
RowStatus,TruthValue,
TEXTUAL-CONVENTIONFROM SNMPv2-TC
CiscoRowOperStatus
FROM CISCO-TC
SnmpAdminStringFROM SNMP-FRAMEWORK-MIB
ciscoMgmt
FROM CISCO-SMI;ciscoCallResourcePoolMIB MODULE-IDENTITYLAST-UPDATED"200511180000Z"ORGANIZATION"Cisco Systems, Inc."CONTACT-INFO" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-resource@cisco.com"DESCRIPTION"The MIB module for call resource pool management.
This MIB supports the resource pool manager feature of
CISCO IOS. This feature provides the ability to accept
or reject calls based on DNIS numbers, resources required,
user DNS domains, and counts of currently active sessions.
"REVISION"200511180000Z"
DESCRIPTION"Updated the imports such that Unsigned32 is imported from
SNMPv2-SMI instead of CISCO-TC. Changed the syntax of
ccrpCDCallType and ccrpCPResourceCallType from OCTET
STRING(SIZE(1)) to BITS."REVISION"9811130000Z"DESCRIPTION"Initial version of this MIB module."::={ ciscoMgmt 124}-- Overview of Call Resource Pool MIB
--
-- MIB description
--
--
-- The Call Resource Pool MIB provides the both configuration and
-- statistics for the entities associated with this feature.
-- The following entities are managed:
-- 1) DNIS Groups
-- A group of DNIS (Destination Number Identification Service)
-- numbers collected together and given a unique name.
-- Behavior is associated with DNIS groups rather than
-- individual DNIS numbers. DNIS numbers may be specified
-- with wild cards.
-- 2) DNIS Group Call Types
-- Optional entries in this table allow specifying call types
-- to assign to calls arriving with a DNIS number in the group,
-- overriding the call's default type.
-- 3) Call Discriminators
-- Provides filtering of calls based on DNIS number and bearer
-- capability. Allows NAS to not answer incoming calls matching
-- call discriminator definitions.
-- 4) Resource Groups
-- Identifies a group of resources with common functionality
-- and capabilities. Examples are modems, voice DSPs, HDLC
-- framers. These are resources which are available to be
-- assigned to calls as needed, rather than hardwired to
-- specific interfaces.
-- 5) Customer Profiles
-- Specifies simultaneous sessions, allowed overflow sessions,
-- DNIS groups used by that customer, resources to be used for
-- different bearer capabilities, VPDN group, etc.
-- 6) VPDN Groups
-- Virtual Private Dial Network (VPDN) groups from the VPDN
-- MIB, may be associated with customer profiles, allowing
-- layer two tunnels to connect calls to customer home routers
-- rather than going directly to layer three routing at the NAS.
--
--
-- Relationships between the configuration tables.
--
-- | Call | | Customer |____| Resource |
-- |Discriminator| | Profile | | Group |
-- \ / \ \
-- \ / \ \
-- \ / \ \
-- \/ \/ \/ \/
-- | DNIS | | VPDN | | Resource |
-- |Group | | Group | | Range |
-- /
-- /
-- \/
-- |DNIS Grp |
-- |Call Type|
----
-- Textual Conventions
--CcrpPhoneNumber ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"Text string representing a telephone number.
Limited to numeric characters 0-9.
"SYNTAXOCTETSTRING(SIZE(1..64))CcrpPhoneNumberPattern ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"Text string representing a telephone number and wild card
characters. Limited to numeric characters 0-9 and the
wild cards '.' and 'x'. Both wild card characters match
single digits only.
"SYNTAXOCTETSTRING(SIZE(1..64))
PhysicalPosition ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"A physical port specification.
An unsigned integer representing the
slot and port within that slot.
The value is generated as:
slot*10^6 + port
Examples:
port 16 located in slot 7 would be
7*10^6 + 16 = 7,000,000 + 16 = 7,000,016
port 0 located in slot 0 would be
0*10^6 + 0 = 0
"SYNTAXUnsigned32-- Call Resource Pool MIB object definitionscCallResourcePoolMIBObjects OBJECTIDENTIFIER::={ ciscoCallResourcePoolMIB 1}-- Configuration objectsccrpConfiguration OBJECTIDENTIFIER::={ cCallResourcePoolMIBObjects 1}ccrpGeneralConfig OBJECTIDENTIFIER::={ ccrpConfiguration 1}
ccrpDnisConfig OBJECTIDENTIFIER::={ ccrpConfiguration 2}ccrpCallDiscriminatorConfig OBJECTIDENTIFIER::={ ccrpConfiguration 3}ccrpResourceConfig OBJECTIDENTIFIER::={ ccrpConfiguration 4}ccrpCustomerProfileConfig OBJECTIDENTIFIER::={ ccrpConfiguration 5}-- Statistics objectsccrpStatistics OBJECTIDENTIFIER::={ cCallResourcePoolMIBObjects 2}ccrpCPStatistics OBJECTIDENTIFIER::={ ccrpStatistics 1}
ccrpDnisStatistics OBJECTIDENTIFIER::={ ccrpStatistics 2}ccrpCDStatistics OBJECTIDENTIFIER::={ ccrpStatistics 3}--
-- General Configuration
--ccrpNoCPCallTreatment OBJECT-TYPESYNTAXINTEGER{noAnswer(1),busy(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Value returned to the telco switch if call is to be
rejected because it doesn't match any defined customer
profile.
noAnswer(1) - ignore the call
busy(2) - return busy
"
DEFVAL{noAnswer}::={ ccrpGeneralConfig 1}ccrpNoResourceCallTreatment OBJECT-TYPESYNTAXINTEGER{channelNotAvailable(1),busy(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Value returned to the telco switch if call is to be
rejected because there is no available resource to
answer the call.
channelNotAvailable(1) - return channel not available,
allowing switch to continue searching for
an available channel
busy(2) - return busy
"DEFVAL{channelNotAvailable}::={ ccrpGeneralConfig 2}
--
-- DNIS Group Configuration
--ccrpDnisGroupTable OBJECT-TYPESYNTAXSEQUENCEOF CcrpDnisGroupEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"
Table of DNIS groups. Each group is a list of
individual DNIS numbers.
"::={ ccrpDnisConfig 1}ccrpDnisGroupEntry OBJECT-TYPESYNTAX CcrpDnisGroupEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the table, containing a single DNIS number
for the DNIS group identified by the first index.
A single DNIS number may not exist in more than one
DNIS group.
Entries in this table may be created and deleted via
the ccrpDnisGroupRowStatus object or the management
console on the system.
Using SNMP, rows are created by a SET request setting
the value of ccrpDnisGroupRowStatus to 'createAndGo'
or 'createAndWait'. Rows are deleted by a SET request
setting the value of ccrpDnisGroupRowStatus to
'destroy'.
Deleting the last entry for a specific value of
ccrpDnisGroupName from this table will cause
associated entries in the dependent tables to
transition to a 'missingDependency' CiscoRowOperStatus.
"INDEX{ ccrpDnisGroupName,IMPLIED ccrpDnisGroupMember }::={ ccrpDnisGroupTable 1}
CcrpDnisGroupEntry::=SEQUENCE{
ccrpDnisGroupName SnmpAdminString,
ccrpDnisGroupMember CcrpPhoneNumberPattern,
ccrpDnisGroupRowStatus RowStatus}ccrpDnisGroupName OBJECT-TYPESYNTAXSnmpAdminString(SIZE(1..23))
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Name for this DNIS group"::={ ccrpDnisGroupEntry 1}ccrpDnisGroupMember OBJECT-TYPESYNTAX CcrpPhoneNumberPattern (SIZE(1..64))MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"DNIS for member of this DNIS group.
A single DNIS number may not be a member of
more than one DNIS group.
Creating a new entry using a DNIS number that
already exists will fail. The existing entry must
be removed first, before creating a new entry under
a different DNIS group name.
"::={ ccrpDnisGroupEntry 2}ccrpDnisGroupRowStatus OBJECT-TYPESYNTAXRowStatus
MAX-ACCESSread-createSTATUScurrentDESCRIPTION"The status of this conceptual row.
An entry may not exist in the active(1) state unless
all objects in the entry have an appropriate value.
All values of RowStatus are allowed.
"::={ ccrpDnisGroupEntry 3}--
-- DNIS Group Call Type Configuration
--ccrpDnisGroupCallTypeTable OBJECT-TYPESYNTAXSEQUENCEOF CcrpDnisGroupCallTypeEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"
This table is used specify a call type to calls
arriving with a signaling protocol which does not
provide bearer capability. An example is Channel
Associated Signaling (CAS).
A call arriving with a DNIS configured in a DNIS group
in this table will be assigned the call type given
here.
"
::={ ccrpDnisConfig 2}ccrpDnisGroupCallTypeEntry OBJECT-TYPESYNTAX CcrpDnisGroupCallTypeEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the table, identifying a call type to
assign to calls within the DNIS group.
Entries in this table may be created and deleted via
the ccrpDnisGroupCallTypeRowStatus object or the
management console on the system.
Using SNMP, rows are created by a SET request setting
the value of ccrpDnisGroupCallTypeRowStatus to
'createAndGo' or 'createAndWait'. Rows are deleted by
a SET request setting the value of ccrpDnisGroupRowStatus
to 'destroy'.
Creating a new row with a value of ccrpDnisGroupName
which does not yet exist in ccrpDnisGroupTable will
cause the new row's ccrpDnisGroupCallTypeOperStatus
to have the value 'missingDependency'.
Existing rows may be modified when the row is active.
"INDEX{IMPLIED ccrpDnisGroupName }
::={ ccrpDnisGroupCallTypeTable 1}
CcrpDnisGroupCallTypeEntry::=SEQUENCE{
ccrpDnisGroupCallType INTEGER,
ccrpDnisGroupCallTypeOperStatus CiscoRowOperStatus,
ccrpDnisGroupCallTypeRowStatus RowStatus}ccrpDnisGroupCallType OBJECT-TYPESYNTAXINTEGER{digital(1),speech(2),undefined(3)}MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Call type to assign to calls arriving with
DNIS number in this entry's DNIS group.
"DEFVAL{undefined}
::={ ccrpDnisGroupCallTypeEntry 1}ccrpDnisGroupCallTypeOperStatus OBJECT-TYPESYNTAX CiscoRowOperStatus
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"A control object to indicate the operational status
of this entry. This object is used to determine that
the dependencies for this entry are valid and active.
This entry is dependent on entries in
ccrpDnisGroupTable.
"::={ ccrpDnisGroupCallTypeEntry 2}ccrpDnisGroupCallTypeRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrentDESCRIPTION"The status of this conceptual row.
An entry may not exist in the active(1) state unless
all objects in the entry have an appropriate value.
All values of RowStatus are allowed.
"::={ ccrpDnisGroupCallTypeEntry 3}--
-- Call Discriminator Configuration
--ccrpCallDiscriminatorTable OBJECT-TYPESYNTAXSEQUENCEOF CcrpCallDiscriminatorEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Table of call discriminator definitions.
A call discriminator enables call filtering based on
call DNIS and call type. Calls to a specific
DNIS which have call types identified in the
associated call discriminator definition will be
rejected.
"::={ ccrpCallDiscriminatorConfig 1}ccrpCallDiscriminatorEntry OBJECT-TYPESYNTAX CcrpCallDiscriminatorEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the table, containing information about a
single call discriminator definition.
Entries in this table may be created and deleted via
the ccrpCDRowStatus object or the management
console on the system.
Using SNMP, rows are created by a SET request setting
the value of ccrpCDRowStatus to 'createAndGo'
or 'createAndWait'. Rows are deleted by a SET request
setting the value of ccrpCDRowStatus to 'destroy'.
Deleting an entry from this table will cause
associated entries in dependent tables to transition
to a 'missingDependency' CiscoRowOperStatus.
Existing rows may be modified when the row is active.
"INDEX{IMPLIED ccrpCDName }::={ ccrpCallDiscriminatorTable 1}
CcrpCallDiscriminatorEntry ::=SEQUENCE{
ccrpCDName SnmpAdminString,
ccrpCDCallType BITS,
ccrpCDRowStatus RowStatus}ccrpCDName OBJECT-TYPESYNTAXSnmpAdminString(SIZE(1..23))
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Name for this call discriminator definition"::={ ccrpCallDiscriminatorEntry 1}ccrpCDCallType OBJECT-TYPESYNTAXBITS{digital(0),speech(1),v110(2),v120(3)}MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Indicates types of calls to be filtered by this
call discriminator definition.
This object is a bit map, with each bit representing
a different call type as identified below.
A 1-bit indicates that call type is filtered.
A 0-bit indicates that call type is not filtered.
Bit 0 - Digital
Bit 1 - Speech
Bit 2 - V.110
Bit 3 - V.120
Setting all defined bits to 1 would result in all calls
being rejected by this call discriminator.
Setting all defined bits to zero would result in all
calls being accepted by this discriminator.
"DEFVAL{{}}::={ ccrpCallDiscriminatorEntry 2}ccrpCDRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrentDESCRIPTION"The status of this conceptual row.
An entry may not exist in the active(1) state unless
all objects in the entry have an appropriate value.
All values of RowStatus are allowed.
"
::={ ccrpCallDiscriminatorEntry 3}-- Call Discriminator Group associationccrpCDDiscriminatedGrpTable OBJECT-TYPESYNTAXSEQUENCEOF CcrpCDDiscriminatedGrpEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"
Table identifying the groups to which each
call discriminator definition is applied.
"::={ ccrpCallDiscriminatorConfig 2}ccrpCDDiscriminatedGrpEntry OBJECT-TYPESYNTAX CcrpCDDiscriminatedGrpEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry identifies a group to be discriminated
by the call discriminator. There may be multiple
entries for the same call discriminator name.
The same [group name, group type] pair may appear
under multiple call discriminators.
Entries in this table may be created and deleted via
the ccrpCDDiscriminatedGroupRowStatus object or the
management console on the system.
Using SNMP, rows are created by a SET request setting
the value of ccrpCDDnisGroupRowStatus to 'createAndGo'
or 'createAndWait'. Rows are deleted by a SET request
setting the value of ccrpCDDnisGroupRowStatus to
'destroy'.
Creating a new row with a value of ccrpCDName which
does not yet exist in ccrpCallDiscriminatorTable will
cause the new row's ccrpCDDiscriminatedGroupOperStatus
to have the value 'missingDependency'.
"INDEX{ ccrpCDName,
ccrpCDDiscriminatedGroupName,
ccrpCDDiscriminatedGroupType }::={ ccrpCDDiscriminatedGrpTable 1}
CcrpCDDiscriminatedGrpEntry ::=SEQUENCE{
ccrpCDDiscriminatedGroupName SnmpAdminString,
ccrpCDDiscriminatedGroupType INTEGER,
ccrpCDDiscriminatedGroupOperStatus CiscoRowOperStatus,
ccrpCDDiscriminatedGroupRowStatus RowStatus}ccrpCDDiscriminatedGroupName OBJECT-TYPESYNTAXSnmpAdminString(SIZE(1..23))MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Name for the group being discriminated
If this is a DNIS group, the value of this object
is the same as some value of ccrmDnisGroupName.
"::={ ccrpCDDiscriminatedGrpEntry 1}ccrpCDDiscriminatedGroupType OBJECT-TYPESYNTAXINTEGER{dnis(1)}MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION
"Indicates type of group being discriminated and
the table where the value of ccrpCDDiscriminatedGroupName
is defined.
dnis(1) - DNIS Group. Value in
ccrpCDDiscriminatedGroupName is same as
value of ccrpDnisGroupName in the
ccrpDnisGroupTable.
"::={ ccrpCDDiscriminatedGrpEntry 2}ccrpCDDiscriminatedGroupOperStatus OBJECT-TYPESYNTAX CiscoRowOperStatus
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"A control object to indicate the operational status
of this entry. This object is used to determine that
the dependencies for this entry are valid and active.
This entry is currently only dependent on entries in
ccrpDnisGroupTable.
"::={ ccrpCDDiscriminatedGrpEntry 3}ccrpCDDiscriminatedGroupRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-create
STATUScurrentDESCRIPTION"The status of this conceptual row.
An entry may not exist in the active(1) state unless
associated entries in other tables are also active.
All values of RowStatus are allowed.
"::={ ccrpCDDiscriminatedGrpEntry 4}--
-- Resource configuration
--ccrpResourceTable OBJECT-TYPESYNTAXSEQUENCEOF CcrpResourceEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"
Table of resource group definitions. Resources
within a group have identical capabilities.
Group membership or size is defined differently
depending on the nature of the resource.
Resources identified by physical locality (port-based)
are specified with multiple ranges in the
ccrpResourceRangeTable.
Alternatively, groups consisting of non-port
resources simply use a single limit to specify the
size.
The object ccrpResourcePortBased is used to indicate
the resource type.
"::={ ccrpResourceConfig 1}ccrpResourceEntry OBJECT-TYPESYNTAX CcrpResourceEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"
An entry in the table, containing definition for
a single resource group.
Entries in this table may be created and deleted via
the ccrpResourceGroupRowStatus object or the management
console on the system.
Using SNMP, rows are created by a SET request setting
the value of ccrpResourceGroupRowStatus to
'createAndGo' or 'createAndWait'. Rows are deleted by a
SET request setting the value of
ccrpResourceGroupRowStatus to 'destroy'.
Deleting an entry from this table will cause
associated entries in dependent tables to transition
to a 'missingDependency' CiscoRowOperStatus.
Existing rows may be modified when the row is active.
"INDEX{IMPLIED ccrpResourceName }
::={ ccrpResourceTable 1}
CcrpResourceEntry ::=SEQUENCE{
ccrpResourceName SnmpAdminString,
ccrpResourcePortBased TruthValue,
ccrpResourceLimit Unsigned32,
ccrpResourceGroupOperStatus CiscoRowOperStatus,
ccrpResourceGroupRowStatus RowStatus}ccrpResourceName OBJECT-TYPESYNTAXSnmpAdminString(SIZE(1..23))MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Name for this physical resource"::={ ccrpResourceEntry 1}
ccrpResourcePortBased OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-createSTATUScurrentDESCRIPTION"Indicates if the resources within this group are
are port-based or not.
Instantiating this with a value of false will also
instantiate ccrpResourceLimit.
"DEFVAL{true}::={ ccrpResourceEntry 2}ccrpResourceLimit OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Specifies the size of this resource group for
non-port based resources.
This object is not instantiated for port-based
resources.
"DEFVAL{0}::={ ccrpResourceEntry 3}
ccrpResourceGroupOperStatus OBJECT-TYPESYNTAX CiscoRowOperStatus
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"A control object to indicate the operational status
of this entry. This object is used to determine that
the dependencies for this entry are valid and active.
This entry is dependent on entries in ccrpResourceRangeTable
if the value of ccrpResourcePortBased is true.
"::={ ccrpResourceEntry 4}ccrpResourceGroupRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrentDESCRIPTION"The status of this conceptual row.
An entry may not exist in the active(1) state unless
all objects in the entry have an appropriate value.
All values of RowStatus are allowed.
"::={ ccrpResourceEntry 5}--
-- Resource Range Table
--ccrpResourceRangeTable OBJECT-TYPESYNTAXSEQUENCEOF CcrpResourceRangeEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"
Table of physical resource range definitions. Resources
within a group have identical capabilities. The hardware
implementing the resources within a range must be of the
same type.
Multiple ranges may be associated with the same resource
group. Each range within a single resource group must
be of identical hardware type.
A resource range may not be associated with multiple
resource groups.
"::={ ccrpResourceConfig 2}ccrpResourceRangeEntry OBJECT-TYPESYNTAX CcrpResourceRangeEntry
MAX-ACCESSnot-accessibleSTATUScurrent
DESCRIPTION"
An entry in the table, containing definition for
a single physical resource range.
Each entry specifies a contiguous range of individual
resources using start and end identification.
The individual resources within a range must be of the
same type and capabilities.
Entries in this table may be created and deleted via
the ccrpResourceRangeRangeRowStatus object or the
management console on the system.
Using SNMP, rows are created by a SET request setting
the value of ccrpResourceRangeRowStatus to
'createAndGo' or 'createAndWait'. Rows are deleted by a
SET request setting the value of
ccrpResourceRangeRowStatus to 'destroy'.
Deleting the last entry for a specific value of
ccrpResourceName from this table will cause
the associated entry in the dependent ccrpResourceTable
to transition to a 'missingDependency' CiscoRowOperStatus.
Existing rows may be modified when the row is active.
"INDEX{ ccrpResourceName,
ccrpResourceRangeIndex }::={ ccrpResourceRangeTable 1}
CcrpResourceRangeEntry ::=SEQUENCE{
ccrpResourceRangeIndex Unsigned32,
ccrpResourceRangeStartPort PhysicalPosition,
ccrpResourceRangeEndPort PhysicalPosition,
ccrpResourceRangeOperStatus CiscoRowOperStatus,
ccrpResourceRangeRowStatus RowStatus}ccrpResourceRangeIndex OBJECT-TYPESYNTAXUnsigned32(1..4294967295)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Index for this physical resource range within the
resource group.
"::={ ccrpResourceRangeEntry 1}ccrpResourceRangeStartPort OBJECT-TYPESYNTAX PhysicalPosition
MAX-ACCESSread-create
STATUScurrentDESCRIPTION"
Range start for specifying resources within
this range.
The allowable values for each field within this
object is system specific.
The default value is
slot 0, port 0
"DEFVAL{0}::={ ccrpResourceRangeEntry 2}ccrpResourceRangeEndPort OBJECT-TYPESYNTAX PhysicalPosition
MAX-ACCESSread-createSTATUScurrentDESCRIPTION"
Range end for specifying resources within
this range.
The allowable values for each field within this
object is system specific.
The default value is
slot 0, port 0
"DEFVAL{0}::={ ccrpResourceRangeEntry 3}
ccrpResourceRangeOperStatus OBJECT-TYPESYNTAX CiscoRowOperStatus
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"A control object to indicate the operational status
of this entry. This object is used to determine that
the dependencies for this entry are valid and active.
This entry is dependent on entries in
ccrpResourceGroupTable.
"::={ ccrpResourceRangeEntry 4}ccrpResourceRangeRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrentDESCRIPTION"The status of this conceptual row.
An entry may not exist in the active(1) state unless
all objects in the entry have an appropriate value.
All values of RowStatus are allowed.
"::={ ccrpResourceRangeEntry 5}
--
-- Customer Profile Configuration
--ccrpCustomerProfileTable OBJECT-TYPESYNTAXSEQUENCEOF CcrpCustomerProfileEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Table of customer profiles definitions.
"::={ ccrpCustomerProfileConfig 1}ccrpCustomerProfileEntry OBJECT-TYPESYNTAX CcrpCustomerProfileEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the table, containing information about a
single customer profile.
Entries in this table may be created and deleted via
the ccrpCPRowStatus object or the management
console on the system.
Using SNMP, rows are created by a SET request setting
the value of ccrpCPRowStatus to 'createAndGo'
or 'createAndWait'. Rows are deleted by a SET request
setting the value of ccrpCPRowStatus to 'destroy'.
Deleting an entry from this table will cause
associated entries in dependent tables to transition
to a 'missingDependency' CiscoRowOperStatus.
Existing rows may be modified when the row is active.
"INDEX{IMPLIED ccrpCPName }::={ ccrpCustomerProfileTable 1}
CcrpCustomerProfileEntry ::=SEQUENCE{
ccrpCPName SnmpAdminString,
ccrpCPSessionLimit Unsigned32,
ccrpCPOverflow Integer32,
ccrpCPRowStatus RowStatus}ccrpCPName OBJECT-TYPESYNTAXSnmpAdminString(SIZE(1..23))MAX-ACCESSnot-accessible
STATUScurrentDESCRIPTION"Name for this Customer Profile"::={ ccrpCustomerProfileEntry 1}ccrpCPSessionLimit OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Simultaneous sessions limit for this customer profile.
This is a soft limit if overflow is allowed as
indicated in the object ccrpCPOverflow.
The allowable value range is platform specific.
"DEFVAL{0}::={ ccrpCustomerProfileEntry 2}ccrpCPOverflow OBJECT-TYPESYNTAXInteger32(-1..2147483647)MAX-ACCESSread-create
STATUScurrentDESCRIPTION"Number of simultaneous sessions allowed over the
value specified in ccrpCPSessionLimit.
If this value is zero, no overflow is allowed and
ccrpCPSessionLimit is a hard limit.
If this value is -1, the is no overflow limit. All
calls will be accepted, up to the exhaustion of
system resources.
The allowable value range is platform specific.
"DEFVAL{0}::={ ccrpCustomerProfileEntry 3}ccrpCPRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrentDESCRIPTION"The status of this conceptual row.
An entry may not exist in the active(1) state unless
all objects in the entry have an appropriate value.
All values of RowStatus are allowed.
"::={ ccrpCustomerProfileEntry 4}
-- Customer Profile DNIS Group associationccrpCPDnisGrpTable OBJECT-TYPESYNTAXSEQUENCEOF CcrpCPDnisGrpEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Table identifying DNIS groups for each customer
profile
"::={ ccrpCustomerProfileConfig 2}ccrpCPDnisGrpEntry OBJECT-TYPESYNTAX CcrpCPDnisGrpEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry identifying a DNIS group for customer
profile. There may be multiple entries for the
same customer profile name. A single DNIS group may
not be associated with more than one customer profile.
Entries in this table may be created and deleted via
the ccrpCPDnisGroupRowStatus object or the management
console on the system.
Using SNMP, rows are created by a SET request setting
the value of ccrpCPDnisGroupRowStatus to 'createAndGo'
or 'createAndWait'. Rows are deleted by a SET request
setting the value of ccrpCPDnisGroupRowStatus to
'destroy'.
Creating a new row with values of ccrpCPName or
ccrpDnisGroupName which do not yet exist in
ccrpCustomerProfileTable or ccrpDnisGroupTable
respectively will cause the new row's
ccrpCPDnisGroupOperStatus to have the value
'missingDependency'.
Existing rows may be modified when the row is active.
"INDEX{ ccrpCPName,IMPLIED ccrpDnisGroupName }::={ ccrpCPDnisGrpTable 1}
CcrpCPDnisGrpEntry ::=SEQUENCE{
ccrpCPDnisGroupOperStatus CiscoRowOperStatus,
ccrpCPDnisGroupRowStatus RowStatus}ccrpCPDnisGroupOperStatus OBJECT-TYPESYNTAX CiscoRowOperStatus
MAX-ACCESSread-only
STATUScurrentDESCRIPTION"A control object to indicate the operational status
of this entry. This object is used to determine that
the dependencies for this entry are valid and active.
This entry is dependent on entries in
ccrpDnisGroupTable and ccrpCustomerProfileTable.
"::={ ccrpCPDnisGrpEntry 1}ccrpCPDnisGroupRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrentDESCRIPTION"The status of this conceptual row.
An entry may not exist in the active(1) state unless
all objects in the entry have an appropriate value.
All values of RowStatus are allowed.
"::={ ccrpCPDnisGrpEntry 2}-- Customer Profile Resource Group associationccrpCPResourceGrpTable OBJECT-TYPESYNTAXSEQUENCEOF CcrpCPResourceGrpEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"
Table identifying resources groups for each customer
profile.
"::={ ccrpCustomerProfileConfig 3}ccrpCPResourceGrpEntry OBJECT-TYPESYNTAX CcrpCPResourceGrpEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"
Each entry identifying a resource group for a customer
profile. There may be multiple resource group entries
for the same customer profile name. A single resource
group may be associated with more than one customer
profile.
Entries in this table may be created and deleted via
the ccrpCPResourceRowStatus object or the management
console on the system.
Using SNMP, rows are created by a SET request setting
the value of ccrpCPResourceRowStatus to 'createAndGo'
or 'createAndWait'. Rows are deleted by a SET request
setting the value of ccrpCPResourceRowStatus to
'destroy'.
Creating a new row with values of ccrpCPName or
ccrpResourceName which do not yet exist in
ccrpCustomerProfileTable or ccrpResourceTable
respectively will cause the new row's
ccrpCPDnisGroupOperStatus to have the value
'missingDependency'.
Existing rows may be modified when the row is active.
"INDEX{ ccrpCPName,
ccrpResourceName,
ccrpCPResourceCallType }::={ ccrpCPResourceGrpTable 1}
CcrpCPResourceGrpEntry ::=SEQUENCE{
ccrpCPResourceCallType BITS,
ccrpCPResourceServiceProfileName SnmpAdminString,
ccrpCPResourceOperStatus CiscoRowOperStatus,
ccrpCPResourceRowStatus RowStatus}ccrpCPResourceCallType OBJECT-TYPE
SYNTAXBITS{digital(0),speech(1),v110(2),v120(3)}MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Indicates types of calls to assign to this resource
for this customer profile.
This object is a bit map, with each bit representing
a different call type as identified below.
A 1-bit indicates that call type is supported.
A 0-bit indicates that call type is not supported.
Bit 0 - Digital
Bit 1 - Speech
Bit 2 - V.110
Bit 3 - V.120
Setting all defined bits to 1 would result in this
resource being available for all calls.
Setting all defined bits to zero would result no
calls being assigned to this resource.
Q.931 specifies Bearer Capability associated with calls.
RFC 2127, ISDN MIB defines the object isdnBearInfoType,
combining Q.931 bearer capability information
transfer capability and user rate.
The correlation between Q.931 information transfer capability
and call types is:
Call Type Q.931
--------- -----
digital = {unrestricted digital, restricted digital}
speech = {speech, 3.1kHz audio, 7kHz audio}
v110 = {Anything with V.110 User Info Layer}
v120 = {Anything with V.120 User Info Layer}
The Q.931 user info layer values of V.110 or V.120 override
all other fields in determining resource manager call types.
The remaining Q.931 transfer capabilities are not currently
supported by resource manager.
The mapping for RFC2127 is:
Call Type RFC2127
--------- -------
digital = {unrestrictedDigital,unrestrictedDigital56,
restrictedDigital}
speech = {speech, audio31, audio7}
v110 = {Not represented in RFC2127}
v120 = {Not represented in RFC2127}
The remaining RFC2127 values are not currently
supported by resource manager.
"::={ ccrpCPResourceGrpEntry 1}
ccrpCPResourceServiceProfileName OBJECT-TYPESYNTAXSnmpAdminString(SIZE(0..23))MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Name of service profile to apply to this resource
whenever a new call matching the CP is assigned to
the resource.
Service profiles are defined via the management
console on the system.
Assigning a service profile is optional.
"DEFVAL{""}::={ ccrpCPResourceGrpEntry 2}ccrpCPResourceOperStatus OBJECT-TYPESYNTAX CiscoRowOperStatus
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"A control object to indicate the operational status
of this entry. This object is used to determine that
the dependencies for this entry are valid and active.
This entry is dependent on entries in ccrpResourceTable
and ccrpCustomerProfileTable.
"::={ ccrpCPResourceGrpEntry 3}ccrpCPResourceRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrentDESCRIPTION"The status of this conceptual row.
An entry may not exist in the active(1) state unless
all objects in the entry have an appropriate value.
All values of RowStatus are allowed.
"::={ ccrpCPResourceGrpEntry 4}-- Customer Profile VPDN Group associationccrpCPVGTable OBJECT-TYPESYNTAXSEQUENCEOF CcrpCPVGEntry
MAX-ACCESSnot-accessible
STATUScurrentDESCRIPTION"Table identifying VPDN groups for customer
profiles.
"::={ ccrpCustomerProfileConfig 4}ccrpCPVGEntry OBJECT-TYPESYNTAX CcrpCPVGEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"
Each entry identifies a VPDN group for a customer
profile.
Each customer profile may have multiple VPDN groups
associated with it.
A VPDN group may be associated with more than one
customer profile.
Entries in this table may be created and deleted via
the ccrpCPVGRowStatus object or the management
console on the system.
Using SNMP, rows are created by a SET request setting
the value of ccrpCPVGRowStatus to 'createAndGo'
or 'createAndWait'. Rows are deleted by a SET request
setting the value of ccrpCPVGRowStatus to 'destroy'.
Creating a new row with a value of ccrpCPName
which does not yet exist in ccrpCustomerProfileTable
or a value of ccrpCPVGName which has not been
configured will cause the new row's
ccrpCPDnisGroupOperStatus to have the value
'missingDependency'.
Existing rows may be modified when the row is active.
"INDEX{ ccrpCPName,IMPLIED ccrpCPVGName }::={ ccrpCPVGTable 1}
CcrpCPVGEntry ::=SEQUENCE{
ccrpCPVGName SnmpAdminString,
ccrpCPVGOperStatus CiscoRowOperStatus,
ccrpCPVGRowStatus RowStatus}ccrpCPVGName OBJECT-TYPESYNTAXSnmpAdminString(SIZE(1..23))MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION
"Name for VPDN group for this customer profile.
"::={ ccrpCPVGEntry 1}ccrpCPVGOperStatus OBJECT-TYPESYNTAX CiscoRowOperStatus
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"A control object to indicate the operational status
of this entry. This object is used to determine that
the dependencies for this entry are valid and active.
This entry is dependent on entries in the
ccrpCustomerProfileTable and VPDN group in system
configuration.
"::={ ccrpCPVGEntry 2}ccrpCPVGRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrentDESCRIPTION"The status of this conceptual row.
An entry may not exist in the active(1) state unless
all objects in the entry have an appropriate value.
All values of RowStatus are allowed.
"::={ ccrpCPVGEntry 3}--
-- Resource Manager Statistics
---- Customer Profile StatisticsccrpCPStatisticsTable OBJECT-TYPESYNTAXSEQUENCEOF CcrpCPStatisticsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Table of customer profile statistics.
The information provided in this table may be used
to better understand usage of network resources
and improve capacity planning.
"::={ ccrpCPStatistics 1}ccrpCPStatisticsEntry OBJECT-TYPESYNTAX CcrpCPStatisticsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the table, containing statistics about a
single customer profile.
An entry is created for each customer profile within
the ccrpCustomerProfileTable.
"AUGMENTS{ ccrpCustomerProfileEntry }::={ ccrpCPStatisticsTable 1}
CcrpCPStatisticsEntry ::=SEQUENCE{
ccrpCPActiveSessions Gauge32,
ccrpCPActiveOverflowSessions Gauge32,
ccrpCPTotalSessions Counter32,
ccrpCPTotalOverflowSessions Counter32,
ccrpCPNumberOverflowState Counter32,
ccrpCPNumberMaxState Counter32,
ccrpCPOverflowTime TimeTicks,
ccrpCPMaxStateTime TimeTicks,
ccrpCPPeakActiveSessions Gauge32,
ccrpCPOverflowRejected Counter32,
ccrpCPResourceRejected Counter32}ccrpCPActiveSessions OBJECT-TYPESYNTAXGauge32UNITS"sessions"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of active sessions for this customer profile."::={ ccrpCPStatisticsEntry 1}ccrpCPActiveOverflowSessions OBJECT-TYPESYNTAXGauge32UNITS"sessions"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"
Number of active sessions which are overflow sessions
for this customer profile.
Overflow sessions are those calls which arrived and
were accepted when the customer profile's
ccrpCPActiveSessions >= ccrpCPSessionLimit.
"::={ ccrpCPStatisticsEntry 2}ccrpCPTotalSessions OBJECT-TYPESYNTAXCounter32UNITS"sessions"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Total number of sessions for this customer profile
since last system re-initialization.
Includes non-overflow and overflow sessions.
Includes all calls which were answered, including those
which may have been terminated due to post-answer
resource restrictions or authorization failures.
"::={ ccrpCPStatisticsEntry 3}ccrpCPTotalOverflowSessions OBJECT-TYPESYNTAXCounter32UNITS"sessions"MAX-ACCESSread-only
STATUScurrentDESCRIPTION"Total number of overflow sessions for this customer
profile since last system re-initialization.
Includes all calls which were answered and identified
as overflow sessions, including those which may have
been terminated due to post-answer resource limits
or authorization failures.
"::={ ccrpCPStatisticsEntry 4}ccrpCPNumberOverflowState OBJECT-TYPESYNTAXCounter32UNITS"occurrences"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of times this customer profile has been in
an overflow state since last system re-initialization.
The customer profile is in overflow state when
ccrpCPActiveSessions > ccrpCPSessionLimit.
If overflow is not allowed for this profile, this value
is always zero.
"::={ ccrpCPStatisticsEntry 5}
ccrpCPNumberMaxState OBJECT-TYPESYNTAXCounter32UNITS"occurrences"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of times this customer profile has reached
its maximum allowed active sessions, including
overflow sessions since last system re-initialization.
The customer profile is in maximum state under the
following conditions:
Overflow allowed and limited
ccrpCPActiveSessions = ccrpCPSessionLimit + ccrpCPOverflowSize.
Overflow not allowed
ccrpCPActiveSessions = ccrpCPSessionLimit.
If overflow is allowed, but not limited by
ccrpCPOverflow, this value will always be
zero.
"::={ ccrpCPStatisticsEntry 6}ccrpCPOverflowTime OBJECT-TYPESYNTAXTimeTicksMAX-ACCESSread-onlySTATUScurrent
DESCRIPTION"The amount of time that this customer profile has been
in overflow state since last system re-initialization.
The customer profile is in overflow state when
ccrpCPActiveSessions > ccrpCPSessionLimit.
"::={ ccrpCPStatisticsEntry 7}ccrpCPMaxStateTime OBJECT-TYPESYNTAXTimeTicksMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The amount of time that this customer profile has reached
its maximum allowed active sessions since last system re-
initialization.
The customer profile is in maximum state under the
following conditions:
Overflow allowed and limited
ccrpCPActiveSessions = ccrpCPSessionLimit + ccrpCPOverflowSize.
Overflow not allowed
ccrpCPActiveSessions = ccrpCPSessionLimit.
If overflow is allowed, but not limited by
ccrpCPOverflow, this value will always be
zero.
"::={ ccrpCPStatisticsEntry 8}
ccrpCPPeakActiveSessions OBJECT-TYPESYNTAXGauge32UNITS"sessions"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The maximum number of active sessions which has
occurred for this customer profile since last system
re-initialization. This is the maximum value of
ccrpCPActiveSessions since last system
re-initialization.
This includes non-overflow and overflow sessions.
The peak value for the overflow sessions may be
computed by subtracting the value of ccrpCPSessionLimit
from this value.
"::={ ccrpCPStatisticsEntry 9}ccrpCPOverflowRejected OBJECT-TYPESYNTAXCounter32UNITS"call attempts"MAX-ACCESSread-onlySTATUScurrent
DESCRIPTION"Number of calls rejected due to exceeding allowed
simultaneous sessions for this customer
profile since last system re-initialization.
If overflow is not allowed for this profile, this
counts the number of times calls arrived when
ccrpCPActiveSessions = ccrpCPSessionLimit.
If overflow is allowed, this counts the number of
time calls arrived when
ccrpCPActiveSessions = ccrpCPSessionLimit + ccrpCPOverflow.
If overflow is allowed, but not limited by
ccrpCPOverflow, this value is always zero.
Includes calls which were answered, then terminated
due to post-answer session counting restrictions for
the customer profile. Does not include calls
terminated due to post-answer resource limits or
post-answer authorization failures beyond customer
profile authorizations.
"::={ ccrpCPStatisticsEntry 10}ccrpCPResourceRejected OBJECT-TYPESYNTAXCounter32UNITS"call attempts"MAX-ACCESSread-only
STATUScurrentDESCRIPTION"Number of calls rejected due to unavailable resources
for this customer profile since last system
re-initialization.
Includes calls which were answered then terminated due
to post-answer resource restrictions.
"::={ ccrpCPStatisticsEntry 11}-- DNIS Session StatisticsccrpDnisStatisticsTableMaxEntries OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The limit on the number of entries that the
ccrpDnisStatisticsTable may contain.
When this table is full, any new DNIS values will be
ignored.
A value of 0 will prevent any DNIS statistics from being
retained. If this value is set to 0 after entries already
exist in the table, those entries will be deleted.
Reducing the value will truncate the table based on the
sort order of the index.
The range for this value is from 0 to a system specific
number specified by ccrpDnisStatisticsTableSystemMax.
"DEFVAL{0}::={ ccrpDnisStatistics 1}ccrpDnisStatisticsTableSystemMax OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The system specific limit on the number of entries
that the ccrpDnisStatisticsTable may contain.
This is the maximum value that will be accepted for
ccrpDnisStatisticsTableMaxEntries.
"::={ ccrpDnisStatistics 2}ccrpDnisStatisticsTableLengthExceeded OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of times a new DNIS has been ignored due to
the ccrpDnisStatisticsTableMaxLength having been reached
since last system re-initialization.
When the table is full, this counter is incremented
both for each new DNIS arriving, as well as every time
the same DNIS arrives.
"::={ ccrpDnisStatistics 3}ccrpDnisStatisticsTable OBJECT-TYPESYNTAXSEQUENCEOF CcrpDnisStatisticsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Table of session counts for individual DNIS numbers.
The information provided in this table may be used
to better understand usage of network resources
and improve capacity planning.
"::={ ccrpDnisStatistics 4}ccrpDnisStatisticsEntry OBJECT-TYPESYNTAX CcrpDnisStatisticsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION
"An entry in the table, containing session counts
for a single DNIS number.
The DNIS does not need to be a member of a DNIS
group or be associated with a customer profile to
appear in this table.
Entries are created as a result of a call being
received by the system with the DNIS number.
"INDEX{IMPLIED ccrpDnisStatisticsDnisNumber }::={ ccrpDnisStatisticsTable 1}
CcrpDnisStatisticsEntry ::=SEQUENCE{
ccrpDnisStatisticsDnisNumber CcrpPhoneNumber,
ccrpDnisStatisticsGroupName SnmpAdminString,
ccrpDnisActiveSessions Gauge32,
ccrpDnisTotalSessions Counter32,
ccrpDnisPeakActiveSessions Gauge32,
ccrpDnisCallTypeRejected Counter32}ccrpDnisStatisticsDnisNumber OBJECT-TYPE
SYNTAX CcrpPhoneNumber
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"DNIS associated with call"::={ ccrpDnisStatisticsEntry 1}ccrpDnisStatisticsGroupName OBJECT-TYPESYNTAXSnmpAdminString(SIZE(0..23))MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Name of DNIS group containing this DNIS. Value
corresponds to ccrpDnisGroupName.
If DNIS is not a member of a DNIS group, this value
is a zero-length string.
"::={ ccrpDnisStatisticsEntry 2}ccrpDnisActiveSessions OBJECT-TYPESYNTAXGauge32
UNITS"sessions"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of active sessions for this DNIS in the
customer profile.
Includes non-overflow and overflow sessions.
"::={ ccrpDnisStatisticsEntry 3}ccrpDnisTotalSessions OBJECT-TYPESYNTAXCounter32UNITS"sessions"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Total number of sessions for this DNIS in the
customer profile since last system re-initialization.
Includes non-overflow and overflow sessions.
Includes all calls which were answered then terminated
by post-answer restrictions for authorization
failures.
"::={ ccrpDnisStatisticsEntry 4}
ccrpDnisPeakActiveSessions OBJECT-TYPESYNTAXGauge32UNITS"sessions"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The maximum number of active sessions which has
occurred for this DNIS since last system
re-initialization.
Includes non-overflow and overflow sessions.
"::={ ccrpDnisStatisticsEntry 5}ccrpDnisCallTypeRejected OBJECT-TYPESYNTAXCounter32UNITS"sessions"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of calls with this DNIS which were rejected
due to call type mismatch, as defined in the
ccrpCallDiscriminatorTable, since last system
re-initialization.
"::={ ccrpDnisStatisticsEntry 6}
-- Call Discriminator StatisticsccrpCDStatisticsTable OBJECT-TYPESYNTAXSEQUENCEOF CcrpCDStatisticsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Table of call discriminator statistics.
The information provided in this table may be used
to better understand usage of network resources
and improve capacity planning.
"::={ ccrpCDStatistics 1}ccrpCDStatisticsEntry OBJECT-TYPESYNTAX CcrpCDStatisticsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the table, containing statistics about a
single call discriminator definition.
An entry is created for each call discriminator within
the ccrpCallDiscriminatorTable.
"AUGMENTS{ ccrpCallDiscriminatorEntry }::={ ccrpCDStatisticsTable 1}
CcrpCDStatisticsEntry ::=SEQUENCE{
ccrpCDRejected Counter32}ccrpCDRejected OBJECT-TYPESYNTAXCounter32UNITS"sessions"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of calls rejected due to matching this call
discriminator definition, as defined in the
ccrpCallDiscriminatorTable, since last system
re-initialization.
"::={ ccrpCDStatisticsEntry 1}-- ******************************************************************
-- Notifications
-- ******************************************************************ccrpMIBNotificationPrefix OBJECTIDENTIFIER::={ ciscoCallResourcePoolMIB 2}
-- ******************************************************************
-- Conformance and Compliance
-- ******************************************************************ccrpMIBConformance OBJECTIDENTIFIER::={ ciscoCallResourcePoolMIB 3}ccrpMIBCompliances OBJECTIDENTIFIER::={ ccrpMIBConformance 1}ccrpMIBGroups OBJECTIDENTIFIER::={ ccrpMIBConformance 2}-- compliance statementsccrpMIBCompliance MODULE-COMPLIANCESTATUScurrentDESCRIPTION"The compliance statement for entities which
implement the CISCO CALL RESOURCE POOL MIB"MODULE-- this moduleMANDATORY-GROUPS
{ ccrpGeneralConfigGroup,
ccrpDnisConfigGroup,
ccrpCDConfigGroup,
ccrpResourceConfigGroup,
ccrpCPConfigGroup,
ccrpCPStatisticsGroup,
ccrpDnisStatisticsGroup,
ccrpCDStatisticsGroup
}::={ ccrpMIBCompliances 1}-- units of conformanceccrpGeneralConfigGroup OBJECT-GROUPOBJECTS{
ccrpNoCPCallTreatment,
ccrpNoResourceCallTreatment
}STATUScurrentDESCRIPTION"A collection of objects providing general Call Resource
Pool configuration.
"::={ ccrpMIBGroups 1}ccrpDnisConfigGroup OBJECT-GROUPOBJECTS{
ccrpDnisGroupRowStatus,
ccrpDnisGroupCallType,
ccrpDnisGroupCallTypeOperStatus,
ccrpDnisGroupCallTypeRowStatus
}STATUScurrentDESCRIPTION"Objects for configuring a named collection of DNIS numbers.
"::={ ccrpMIBGroups 2}ccrpCDConfigGroup OBJECT-GROUPOBJECTS{
ccrpCDCallType,
ccrpCDRowStatus,
ccrpCDDiscriminatedGroupOperStatus,
ccrpCDDiscriminatedGroupRowStatus
}STATUScurrentDESCRIPTION"Objects for configuring a call discriminators.
"::={ ccrpMIBGroups 3}ccrpResourceConfigGroup OBJECT-GROUPOBJECTS{
ccrpResourcePortBased,
ccrpResourceLimit,
ccrpResourceGroupOperStatus,
ccrpResourceGroupRowStatus,
ccrpResourceRangeStartPort,
ccrpResourceRangeEndPort,
ccrpResourceRangeOperStatus,
ccrpResourceRangeRowStatus
}STATUScurrentDESCRIPTION"Objects for configuring resource groups.
"::={ ccrpMIBGroups 4}ccrpCPConfigGroup OBJECT-GROUPOBJECTS{
ccrpCPSessionLimit,
ccrpCPOverflow,
ccrpCPRowStatus,
ccrpCPDnisGroupOperStatus,
ccrpCPDnisGroupRowStatus,
ccrpCPResourceServiceProfileName,
ccrpCPResourceOperStatus,
ccrpCPResourceRowStatus,
ccrpCPVGOperStatus,
ccrpCPVGRowStatus
}STATUScurrent
DESCRIPTION"Objects for configuring customer profiles.
"::={ ccrpMIBGroups 5}ccrpCPStatisticsGroup OBJECT-GROUPOBJECTS{
ccrpCPActiveSessions,
ccrpCPActiveOverflowSessions,
ccrpCPTotalSessions,
ccrpCPTotalOverflowSessions,
ccrpCPNumberOverflowState,
ccrpCPNumberMaxState,
ccrpCPOverflowTime,
ccrpCPMaxStateTime,
ccrpCPPeakActiveSessions,
ccrpCPOverflowRejected,
ccrpCPResourceRejected
}STATUScurrentDESCRIPTION"Objects for providing customer profile statistics.
"::={ ccrpMIBGroups 6}ccrpDnisStatisticsGroup OBJECT-GROUP
OBJECTS{
ccrpDnisStatisticsTableMaxEntries,
ccrpDnisStatisticsTableSystemMax,
ccrpDnisStatisticsTableLengthExceeded,
ccrpDnisStatisticsGroupName,
ccrpDnisActiveSessions,
ccrpDnisTotalSessions,
ccrpDnisPeakActiveSessions,
ccrpDnisCallTypeRejected
}STATUScurrentDESCRIPTION"Objects for providing DNIS statistics.
"::={ ccrpMIBGroups 7}ccrpCDStatisticsGroup OBJECT-GROUPOBJECTS{
ccrpCDRejected
}STATUScurrentDESCRIPTION"Objects for providing call discriminator statistics.
"::={ ccrpMIBGroups 8}END